Headlines at Hopkins: news releases from across
the 
university Headlines
@Hopkins
News by Topic: news releases organized by subject News by Topic
News by School: news releases organized by the 
university's 9 schools & divisions News by School
Events Open to the Public (campus-wide) Events Open
to the Public
Blue Jay Sports: Hopkins Athletic Center Blue Jay Sports
Search News Site Search the Site

Contacting the News Staff: directory of university 
press officers Contacting
News Staff
Receive News Via Email (listservs) Receive News
Via Email
Resources for Journalists Resources for Journalists

Virtually Live@Hopkins: audio and video news Virtually
Live@Hopkins
Hopkins in the News: news clips about Hopkins Hopkins in
the News

Faculty Experts: searchable resource organized by 
topic Faculty Experts
Faculty and Administrator Photos Faculty and
Administrator
Photos
Faculty with Homepages Faculty with Homepages

JHUNIVERSE Homepage JHUniverse Homepage
Headlines at Hopkins
News Release

Office of News and Information
Johns Hopkins University
3003 N. Charles Street, Suite 100
Baltimore, Maryland 21218-3843
Phone: (410) 516-7160 | Fax (410) 516-5251

July 2, 2001
FOR IMMEDIATE RELEASE
CONTACT: Phil Sneiderman
prs@jhu.edu


Lifting Device Helps Handicapped Kids
Enjoy the Playground

Undergraduate Engineers Use Scuba Tank to Power Their Invention

For children who use walkers or wheelchairs, the elevated activity platforms on many playgrounds remain sadly out of reach. To remedy this, three Johns Hopkins undergraduate engineering students have invented a portable, air-powered device that can lift a disabled child and his or her caretaker more than 3 feet above the ground, giving them easy access to play structures. The lifting device was designed and built by seniors Christian Callaghan, Denice Koh and Nate Kruis, all 22 years old, during a two-semester course in which students tackle real-world engineering assignments, working within a budget of no more than $8,000. For the lifter project, the three students prepared a budget of $6,100, which they exceeded by only $400. They completed the device shortly before graduating in May. Callaghan, a mechanical engineering major, is from Scarsdale, N.Y. Koh, who majored in biomedical engineering, grew up in Rockville, Md. Kruis, a mechanical engineering major, is from Hershey, Pa.

Children who use leg braces, walkers or wheelchairs can easily enter the lifting device when one side is folded down to serve as a ramp.
Photo by Will Kirk

The project began as an assignment proposed by the Baltimore-based Volunteers for Medical Engineering Inc. The organization had contacted area schools to ask how the group could help make playgrounds more accessible to children with limited mobility. Educators reported that children who require leg braces, walkers and wheelchairs had trouble getting onto the elevated playground structures outside their schools. On most of these structures, a child must be able to climb steps or a ladder in order to crawl through tubes or use the play station features mounted above the platform. Ramps are often impractical because of space limitations.

To solve this problem, the Johns Hopkins students designed an aluminum lifting device featuring a 3-foot- square passenger compartment capable of supporting 500 pounds. Their biggest challenge, however, was figuring out the safest and most efficient power source for raising and lowering the enclosure. Because the lifter was to be used outside on a busy playground, an electric motor requiring a long extension cord was ruled out. The engineering students considered water power, a weight and pulley system and other options before settling on the scuba tank. "It turned out that compressed air was the cheapest and cleanest power supply," Callaghan says.

Air pressure from the tank activates a pneumatic piston and pulley system that gently moves the passenger compartment up and down. The students estimate the device can be used for 100 lifts and descents before the air tank requires a $5 refill. To help prevent accidents, the students added several safety features. A brake holds the passenger compartment in place even if air pressure is lost, and a lock box restricts access to the controls. The students also installed two pairs of wheels on one end so that the lifter can be tilted back like an appliance dolly and rolled from one place to another.

As undergraduate engineers, Nate Kruis, Denice Koh and Christian Callaghan invented a playground lifting device for children with disabilities.
Photo by Will Kirk

The finished unit will be turned over to Volunteers for Medical Engineering, whose members plan to demonstrate it at area schools attended by children with disabilities. "I was very impressed by what the Johns Hopkins students built," said Jan Hoffberger, the organization's executive director. "I was impressed by how smoothly it worked and how easy it was to wheel the lifter from one place to another. We're hoping this is a design that can be replicated and used wherever it's needed."

The playground lifting device was one of 12 Johns Hopkins projects completed this year by undergraduates in the Department of Mechanical Engineering's Senior Design Project course. The class is taught by Andrew F. Conn, a Johns Hopkins graduate with more than 25 years of experience in public and private research and development. Each team of two or three students, working within their budget, had to design a device, purchase or fabricate the parts, and assemble the final product. Corporations, government agencies and nonprofit groups provided the assignments and funding.

The course is traditionally well-received by Johns Hopkins undergraduates. Kruis said the practical engineering experience was invaluable. "It's a big jump from working something out on paper to making the real thing," he said. Added Koh: "It was exciting to be able to do a real hands-on project that will help children."

Color images available of the lifter and the student inventors; contact Phil Sneiderman

Additional Photos

More photos of the lifting device and the student inventors are available online here: www.jhu.edu/news_info/news/home01/jul01/lifter2.html
 

Related Web Sites

Johns Hopkins Department of Mechanical Engineering
Volunteers for Medical Engineering
 


Johns Hopkins University news releases can be found on the World Wide Web at http://www.jhu.edu/news_info/news/
   Information on automatic e-mail delivery of science and medical news releases is available at the same address.


Go to Headlines@HopkinsHome Page