Headlines at Hopkins: news releases from across
the 
university Headlines
@Hopkins
News by Topic: news releases organized by
subject News by Topic
News by School: news releases organized by the 
university's 9 schools & divisions News by School
Events Open to the Public (campus-wide) Events Open
to the Public
Blue Jay Sports: Hopkins Athletic Center Blue Jay Sports
Search News Site Search the Site

Contacting the News Staff: directory of
university 
press officers Contacting
News Staff
Receive News Via Email (listservs) Receive News
Via Email
Resources for Journalists Resources for Journalists

Virtually Live@Hopkins: audio and video news Virtually
Live@Hopkins
Hopkins in the News: news clips about Hopkins Hopkins in
the News

Faculty Experts: searchable resource organized by 
topic Faculty Experts
Faculty and Administrator Photos Faculty and
Administrator
Photos
Faculty with Homepages Faculty with Homepages

JHUNIVERSE Homepage JHUniverse Homepage
Headlines at Hopkins
News Release

Office of News and Information
Johns Hopkins University
3003 N. Charles Street, Suite 100
Baltimore, Maryland 21218-3843
Phone: (410) 516-7160 | Fax (410) 516-5251

September 3, 2002
FOR IMMEDIATE RELEASE
CONTACT: Phil Sneiderman
(410) 516-7907
prs@jhu.edu


Free Software Predicts How and When
Steel Beams Will Buckle

Civil Engineering Researcher Creates Computer Tool
to Aid Structural Designers

A free computer program developed by a Johns Hopkins civil engineering researcher allows designers of thin-walled structures, including buildings and bridges, to test their stability and safety before a single beam is put into place. This modeling software, devised by Benjamin W. Schafer (pictured at right), asks designers to enter their materials, the geometry of their structure and the load it is expected to withstand. The program quickly reports how and under what conditions the structural components will buckle.

The computer tool could become increasingly important as construction rules change to accommodate innovations in structural design "To keep costs down, many people today are looking for maximum strength with the minimum amount of materials," says Schafer, an assistant professor in the Department of Civil Engineering. "So very often, you end up with what we call thin-walled structures. But instability or buckling can cause these structures to collapse or 'fail.' If you press down on the top of a plastic straw, there's basically only one way it can buckle. With more complicated thin-walled structures, there are many more ways this can happen. Engineers need to predict how and when this will happen, so they can design buildings that won't buckle under a particular load. This software is a tool that does just that."

Schafer has developed free software to help engineers predict when cold-formed steel pieces will buckle.
Photo by Will Kirk

Schafer's software, called CUFSM, is available for free downloading on his Web site: www.ce.jhu.edu/bschafer. The civil engineering researcher recently updated the program to provide a far more user-friendly interface. It is available in a stand-alone version for users of Windows and in another version that is compatible with the popular MatLab software, which is available on virtually all computer platforms. The Web site also features tutorials and examples to help designers and students learn to use CUFSM.

The computer program is an extension of research Schafer began while earning his doctorate in structural engineering from Cornell University in 1997. (The software's name is short for Cornell University Finite Strip Method because Schafer developed his first version of the program at that school.) At Johns Hopkins, Schafer's research focuses on the behavior and design of cold-formed steel sheet metal bent into various shapes. Cold-formed steel has become a popular structural alternative to timber and is used extensively in low-rise buildings. It is utilized in a variety of applications, supporting floors, roofs and walls in industrial, commercial and residential buildings. The more general category of thin-walled structures can range from the previously mentioned industrial and residential buildings to box girder bridges, ship hulls and aircraft skins, as well as buried structures such as tanks, pipes and culverts. "The idea is to provide maximum strength with the minimum material," Schafer says. "The design is critical. Even small changes in the geometry can affect the strength of the structure and how it might buckle. Placing little bumps or folds in the members, using corrugated versus flat sheet metal -- all of these things can make a difference."

To test how such changes in geometry and materials will affect the stability of a thin-walled structure, an engineer can enter this data in the CUFSM software to determine how much compression and/or bending the structure can tolerate before it buckles. In this way, the sturdiest and most cost-effective design can be developed long before the structure is built.

Johns Hopkins researcher Benjamin Schafer uses a hydraulic actuator to conduct a four-point bending test on a cold-formed steel beam in his structural engineering lab. He is assisted by Sam Phillips, left, and Tim Ruth, two juniors majoring in civil engineering.
Photo by Will Kirk

Currently, civil engineers must adhere to rigid building codes that severely limit their design options, Schafer says. These rules were adopted to ensure that structures are safe and to maintain a level playing field among competitors. "These highly prescriptive building codes accomplished that, but they also took away the opportunity for structural innovation," Schafer says. "My software can help bring it back by giving engineers a way to predict buckling for structures that don't fall within the rules."

The Johns Hopkins researcher says the construction industry is already working toward revised guidelines that will allow new shapes of strong yet thin steel beams to help reduce costs. "Knowing this is going to be allowed is encouraging people to manufacture more innovative cross-section pieces," Schafer says. "This modeling technique will make a big difference to the industry. It fundamentally changes what you can design."

Schafer conducts tests in his structural engineering lab to make sure his software will accurately predict buckling in thin-walled structures.
Photo by Will Kirk

To prepare the next generation of structural designers for this change and to teach them how buckling can occur, Schafer also uses the software as a teaching tool in his undergraduate civil engineering classes at Johns Hopkins. "This is how engineering design will be done in the very near future," he says.

Schafer's research has been funded by the American Iron and Steel Institute and the Metal Building Manufacturers Association.

Color images of Prof. Schafer in his lab are available; contact Phil Sneiderman.

Related Web Sites

Department of Civil Engineering
Ben Schafer's Home Page
 


Johns Hopkins University news releases can be found on the World Wide Web at http://www.jhu.edu/news_info/news/
   Information on automatic e-mail delivery of science and medical news releases is available at the same address.


Go to Headlines@HopkinsHome Page