Headlines at Hopkins: news releases from across
the 
university Headlines
@Hopkins
News by Topic: news releases organized by
subject News by Topic
News by School: news releases organized by the 
university's 9 schools & divisions News by School
Events Open to the Public (campus-wide) Events Open
to the Public
Blue Jay Sports: Hopkins Athletic Center Blue Jay Sports
Search News Site Search the Site

Contacting the News Staff: directory of
university 
press officers Contacting
News Staff
Receive News Via Email (listservs) Receive News
Via Email
Resources for Journalists Resources for Journalists

Virtually Live@Hopkins: audio and video news Virtually
Live@Hopkins
Hopkins in the News: news clips about Hopkins Hopkins in
the News

Faculty Experts: searchable resource organized by 
topic Faculty Experts
Faculty and Administrator Photos Faculty and
Administrator
Photos
Faculty with Homepages Faculty with Homepages

JHUNIVERSE Homepage JHUniverse Homepage
Headlines at Hopkins
News Release

Office of News and Information
Johns Hopkins University
3003 N. Charles Street, Suite 100
Baltimore, Maryland 21218-3843
Phone: (410) 516-7160 | Fax (410) 516-5251

June 26, 2003
FOR IMMEDIATE RELEASE
CONTACT: Phil Sneiderman
(410) 516-7907
prs@jhu.edu


Student-Built Pill Dispenser
Gives Patient More Independence

High-Tech Device Allows Quadriplegic Man to Take
Medication Without a Nurse's Help

Four Johns Hopkins undergraduates have a designed and constructed a computer-guided pill dispensing machine that will enable a quadriplegic man to lead a more independent life. Using a mouth stick, Robert Arthur Williams will be able to order one of up to 12 different medications stored inside the machine. Then, when Williams taps a "slam switch" (he has limited mobility in his right arm), the machine will dispense a pill through a tube leading to Williams' mouth.

While the students worked on the machine, Williams was able to move out of a nursing home and into a three-bedroom Baltimore area house with two companions who assist with his care. "With this machine, I'll be able to take medicine for pain or muscle spasms at 3 in the morning without waking up one of my helpers," he said. "I'll be able to take care of myself for longer periods of time now."

A. Robert Arthur Williams, a quadriplegic, needed a machine to allow him to take his own medication. Ross Whitaker and Paul Stemniski were members of the Johns Hopkins student team that designed and built the device.
Photo by Will Kirk

Williams, a 40-year-old former welder-mechanic, lost the use of his limbs in 1997 when he was struck by a car while crossing a street. After more than four years in a nursing home on a regimen that required him to take up to a dozen pills a day, Williams sought to live in a more independent setting. "To do that, they told me I'd have to find a way to have my medications dispensed to me whenever I needed them, 24 hours a day," he said. For help, Williams turned to the Volunteers for Medical Engineering, a Baltimore organization that provides customized equipment and devices to people with unusual medical problems.

VME administrators, in turn, referred the request to students in the Senior Design Project course in the Department of Mechanical Engineering at Johns Hopkins. Four engineering students enrolled in the two-semester course were asked to design, build and test a device that would allow Williams to take his own medication, as needed, despite his severely limited mobility. The students could spend no more than $8,000 to produce their prototype. "This project had so many challenging aspects involved in it -- electronics, mechanics, ergonomics and computer programming," said Ross Whitaker, a member of the student design team. "We got a whole array of engineering experience while working on it." In the finished device, Williams' medicine is stored inside a locked box that houses 12 waterwheel shaped dispensers. Each wheel has 15 pill compartments, enabling the device to store up to 180 pills altogether. When Williams needs a particular pill, he can use his mouth stick to press a series of numbered buttons mounted on the front of the unit. First, he enters a security code, then enters the number that corresponds to the medication he wishes to take. Next, when he taps the slam switch, a computer signals the appropriate waterwheel container to turn, dropping the pill into a Teflon coated chute. Gravity causes the pill to slide down the chute and into a flexible tube leading to Williams' mouth. Water bottles and straws mounted on his wheelchair and near his bed help him swallow the medication. If he needs additional pills, he can repeat the sequence.

B. Williams uses a mouth stick to enter a security code and order medication as needed.
Photo by Will Kirk

"It required a lot of work, but I think the students did a very thorough job on it," said Alan Markham, a retired engineer and VME member who monitored the project. "The students put a lot of ingenious thought into it."

"This was a very challenging project, but also a very rewarding one," said Paul Stemniski, another of the student inventors. "There was a lot of satisfaction in knowing that we were helping Robert."

C. Whitaker and Stemniski, inspect the computer controls that help deliver pills through a plastic tube to Williams.
Photo by Will Kirk

Stemniski, 22, a mechanical engineering major from Hockessin, Del., plans to begin graduate engineering studies in the fall at the University of Michigan. Whitaker, 22, a biomedical engineering major from Winslow, Maine, is joining St. Jude Medical Inc. as a field engineer. Their Senior Design Project team also included Mark O'Leary, 21, a mechanical engineering major from Ipswich, Mass., and Yo-Rhin Rhim, 22, a mechanical engineering major from Englewood-Cliffs, N.J. Rhim will enter graduate school at Johns Hopkins in the fall, seeking a master's degree in mechanical engineering.

The pill dispensing device was one of 11 Johns Hopkins projects completed this year by undergraduates in the Senior Design Project course. The class is taught by Andrew F. Conn, a Johns Hopkins graduate with more than 30 years of experience in public and private research and development. Each team of three or four students, working within budgets of up to $10,000, had to design a device, purchase or fabricate the parts, and assemble the final product. Corporations, government agencies and nonprofit groups provided the assignments and funding. The course is traditionally a well-received hands-on engineering experience for Johns Hopkins undergraduates.

Color photos available of the device, the students and Williams; Contact Phil Sneiderman.

Related links
Johns Hopkins Department of Mechanical Engineering
Volunteers for Medical Engineering

To see more photos of the pill-dispensing device, follow this link.


Johns Hopkins University news releases can be found on the World Wide Web at http://www.jhu.edu/news_info/news/
   Information on automatic e-mail delivery of science and medical news releases is available at the same address.


Go to Headlines@HopkinsHome Page