Headlines at Hopkins: news releases from across
the 
university Headlines
@Hopkins
News by Topic: news releases organized by
subject News by Topic
News by School: news releases organized by the 
university's 9 schools & divisions News by School
Events Open to the Public (campus-wide) Events Open
to the Public
Blue Jay Sports: Hopkins Athletic Center Blue Jay Sports
Search News Site Search the Site

Contacting the News Staff: directory of
university 
press officers Contacting
News Staff
Receive News Via Email (listservs) Receive News
Via Email
Resources for Journalists Resources for Journalists

Virtually Live@Hopkins: audio and video news Virtually
Live@Hopkins
Hopkins in the News: news clips about Hopkins Hopkins in
the News

Faculty Experts: searchable resource organized
by 
topic Faculty Experts
Faculty and Administrator Photos Faculty and
Administrator
Photos
Faculty with Homepages Faculty with Homepages

JHUNIVERSE Homepage JHUniverse Homepage
Headlines at Hopkins
News Release

Office of News and Information
Johns Hopkins University
901 South Bond Street, Suite 540
Baltimore, Maryland 21231
Phone: 443-287-9960 | Fax: 443-287-9920

December 13, 2005
FOR IMMEDIATE RELEASE
CONTACT: Phil Sneiderman
443-287-9960
prs@jhu.edu

Tiny Self-Assembling Cubes Could Carry
Medicine, Cell Therapy

Porous Metallic Boxes Can Easily Be Tracked via MRI

Johns Hopkins researchers have devised a self- assembling cube-shaped perforated container, no larger than a dust speck, that could serve as a delivery system for medications and cell therapy.

The relatively inexpensive microcontainers can be mass-produced through a process that mixes electronic chip-making techniques with basic chemistry. Because of their metallic nature, the cubic containers location in the body could easily be tracked by magnetic resonance imaging.

The method of making these self-assembling containers and the results of successful lab tests involving the cubes were reported in a paper published in the December 2005 issue of the journal Biomedical Microdevices. In the tests, the hollow cubes housed and then dispensed microbeads and live cells commonly used in medical treatment.

David H. Gracias is an assistant professor in the Department of Chemical and Biomolecular Engineering at Johns Hopkins.
Photo by Will Kirk

"Our group has developed a new process for fabricating three-dimensional micropatterned containers for cell encapsulation and drug delivery," said David H. Gracias, who led the lab team. "We're talking about an entirely new encapsulation and delivery device that could lead to a new generation of 'smart pills.' The long-term goal is to be able to implant a collection of these therapeutic containers directly at the site of an injury or an illness."

Gracias is an assistant professor in the Department of Chemical and Biomolecular Engineering in the Whiting School of Engineering at Johns Hopkins. He focuses on building micro and nanosystems with medical applications. He believes the microcontainers developed in his lab could someday incorporate electronic components that would allow the cubes to act as biosensors within the body or to release medication on demand in response to a remote-controlled radio frequency signal.

(A) Optical image showing a collection of biocontainers. (B-D) Optical and Scanning electron microscopy images at different stages of the fabrication process; (B) the 2D precursor with electrodeposited surfaces, (C) the precursor with surfaces and hinges, and (D) the self-assembled biocontainer.

To make the self-assembling containers, Gracias and his colleagues begin with some of the same techniques used to make microelectronic circuits: thin film deposition, photolithography and electrodeposition. These methods produce a flat pattern of six squares, in a shape resembling a cross. Each square, made of copper or nickel, has small openings etched into it, so that it eventually will allow medicine or therapeutic cells to pass through.

The researchers use metallic solder to form hinges along the edges between adjoining squares. When the flat shapes are heated briefly in a lab solution, the metallic hinges melt. High surface tension in the liquified solder pulls each pair of adjoining squares together like a swinging door. When the process is completed, they form a perforated cube. When the solution is cooled, the solder hardens again, and the containers remain in their box-like shape.

"To make sure it folds itself exactly into a cube, we have to engineer the hinges very precisely," Gracias said. "The self-assembly technique allows us to make a large number of these microcontainers at the same time and at a relatively low cost."

The tiny cubes are coated with a very thin layer of gold, so that they are unlikely to pose toxicity problems within the body. The microcontainers have not yet been implanted in humans or animals, but the researchers have conducted lab tests to demonstrate how they might work in medical applications.

Scanning electron microscopy images of image of (A) a hollow, open surfaced, biocontainer, and (B) a device loaded with glass microbeads. (C) Fluorescence microscopy images of a biocontainer loaded with cell-ECM-agarose with the cell viability stain, Calcein-AM. (D) Release of viable cells from the biocontainer.

Gracias and his colleagues used micropipettes to insert into the cubes a suspension containing microbeads that are commonly used in cell therapy. The lab team showed that these beads could be released from the cubes through agitation. The researchers also inserted human cells, similar to the type used in medical therapy, into the cubes. A positive stain test showed that these cells remained alive in the microcontainers and could easily be released.

At the Johns Hopkins School of Medicine's In Vivo Cellular and Molecular Imaging Center, researcher Barjor Gimi and colleagues then used MRI technology to locate and track the metallic cubes as they moved through a sealed microscopic s-shaped fluid channel. This demonstrated that physicians will be able to use non-invasive technology to see where the therapeutic containers go within the body. Some of the cubes (those made mostly of nickel) are magnetic, and the researchers believe it should be possible to guide them directly to the site of an illness or injury.

The researchers are now refining the microdevices so that they have nanoporous surfaces. Gimi, whose research focuses on magnetic resonance microimaging of cell function, envisions the use of nanoporous devices for cell encapsulation in hormonal therapy. He also envisions biosensors mounted on these devices for non-invasive signal detection.

"We believe these self-assembling microcontainers have great potential as a new tool for medical diagnostics and treatment," Gracias said.

Doctoral student Timothy Leong and David H. Gracias, leader of the research team, fabricate the self-assembling microcubes in a "clean room" to prevent dust from clogging the tiny devices. The are required to wear special apparel in the room.
Photo by Will Kirk

Lead author on the Biomedical Microdevices paper was Gimi, a post-doctoral fellow in the Russell H. Morgan Department of Radiology and Radiological Science in the Johns Hopkins School of Medicine. Gracias served as senior author. Co-authors were Timothy Leong, a doctoral student in the Johns Hopkins Department of Chemical and Biomolecular Engineering; Zhiyong Gu, a postdoctoral fellow in the Department of Chemical and Biomolecular Engineering; Michael Yang, an undergraduate majoring in biomedical engineering; Dmitri Artemov, an associate professor in the Department of Radiology; and Zaver M. Bhujwalla, a professor in the Department of Radiology and director of the In Vivo Cellular and Molecular Imaging Center.

The research was supported in part by a grant from the Johns Hopkins University In Vivo Cellular and Molecular Imaging Center funded by the National Institutes of Health.

The Johns Hopkins University has filed for a provisional patent covering the self-assembling microcontainer technology.

Images of the technology and the researchers available; contact Phil Sneiderman.

Related Links
David Gracias' Web Page
Johns Hopkins Department of Chemical and Biomolecular Engineering
Johns Hopkins Department of Radiology
Johns Hopkins In Vivo Cellular and Molecular Imaging Center


Johns Hopkins University news releases can be found on the World Wide Web at http://www.jhu.edu/news_info/news/
   Information on automatic e-mail delivery of science and medical news releases is available at the same address.


Go to Headlines@HopkinsHome Page